Jesus be the center of it all (Matthew 6:31-34) #JesusLovesYou
We deliver!
(918) 344-6929 located in Cleveland, Oklahoma
add-ON options for your table or bench -
Please read the entire section-
CHOOSE ANY ADD-ON OPTIONS FOR YOUR TABLE OR BENCH -
Let's talk about table top options and keep scroll for bench options. Lots of information on this page so review entire page -
TABLE OPTIONS -
Planked rustic table top -
Planked rustic top, most customers choose this one because it leaves the seam defined to see each board plank to give it more of a farmhouse feel - which is the one we do more of.
Wood type - keep scrolling for info.
We try to eliminate spacing between the boards as best as we can. Each table top is glued up, and we use pocket holes.
I do offer the option of wood filling the seams at no additional charge. This option helps fill the seams so food cannot get in them however they may require some maintenance as wood moves. Please let me know if you would like this option and see our FAQs page for information on wood fill option (Click here).
Butcher Block edge cut the table tops (seamless look vs planked) -
If your table is,
4ft - 6ft Length - $40,
7ft - 8ft L - $50 ,
9ft - 10ft L - $60
11ft - 12ft L - $70
This process is use on desk tops for example or if you want more of a seamless top.
When we get the wood boards, they have a rounded edge. We cut those to a square 90 degree cut and butt to together to give it more of a seamless look, still using pocket holes, gluing up seams. We don't do a true butcher block style table top. (Click here to see examples)
FINISH COLOR STAIN, PAINT AND MORE CLICK HERE
Wider table top -
Our standard width is 37" (36" with the 3" thick look added)
We have done all variations - 40", 42", 48", 55", 6ft wide, whatever fits your space.
Go from 37" up to 46" wide (9" total) for additional -
If your table is,
4ft Length - $45
5ft -8ft L - $70
9ft -10ft L - $95
11ft -12ftL - $110
48" wide - Go from 37" up to 48" (9" total) for additional -
If your table is,
4ft Length - $60
5ft -8ft L - $100
9ft -10ft L - $125
11ft -12ftL - $140
Go from 37" up to 55" wide (9" total) for additional -
If your table is,
4ft Length - $75
5ft -8ft L - $130
9ft -10ft L - $155
11ft -12ftL - $170
Need wider...basically $60 per 9" width after 55"
End Caps (Bread Boards) -
Adding end caps (pair) to the table is $50, and $20 on a bench. End caps are the boards that cap the ends and run a different direction.
(Note - as normal wood movement happens, the end caps can stick out little from the main table section ). Optional DIY
FINISH COLOR STAIN, PAINT AND MORE CLICK HERE
Wood type we use -
The normal type of wood we use to build our great pieces is Douglas Fir and some Pine, both kiln dry however wood movement is still normal for these soft wood types (see our FAQ page).
I do have a resource to get hardwood in Ash or Red Oak, for table tops only. Keep in mind that pricing will increase for hardwoods. Example for a regular table top, you could be looking at $400+ for a hardwood added to cost.
3" Thick framed table top -
Regular table tops are approx 1-1/2" thick, and we can frame them for a 3" thick look.
We started doing this top when folks wanted the railcar / boxcar thick look without the high price cost of that wood type.
4ft-6ft table length $70
7ft-8ft L - $90
9ft-10ft L- $110
11ft-12ft L - $130
Physically distress your table top -
We can beat up your table with various tools to give it a rough and we sand it smooth look.
Table top only
4-7ft L add $50
8-10ft L add $75
11-12ft L add $100.
Entire table, add $40 to prior numbers.
Slide-in table extensions-
(adds length to your table picture(s) are at bottom of this page) -
(adds 2ft to your overall table length for 12" pair). These are 2 pieces that store separate from your table. We construction a structure on the end of the table where these extensions slide in to the ends.
Add $120 for 2 - 12"D extensions (the pair) and if they are 3" thick framed $155.
Pricing is up to 48" L and they are 12" D.
(49" or longer $140+ / $170+, 3"framed).
You don't have to do 12"W they can be smaller or up to 18"W depending on table length.
Table leaf/leaves - These we don't do at this time.
Add the metal bar All Thread/Threaded rod between table legs -
This gives your table a bit of an industrial farmhouse look. We can add other motel parts such as corner angle/strap, bolts on the edges of the short and long side of the table top edge, and any other inspiration you may have. This can be in place of the board that connects the 2 table legs on any style of table or bench. Click here for an example.
Threaded rod is 1-1/4" diameter rod includes washer s & nuts.
Table cost - example if table is 8ft L then subtract 1ft, 7ft x $20 =$140 addition to table price.
Bench cost - If bench is 7ft L then 7ft x $20 =$140 additional to the bench price.
Bar and Pub height on handcrafted Tables and Benches (excludes turned leg pieces) -
Bar height 36" tall - table is additional $30 and 24" bench $20
Pub height 42" tall - table is additional $40 and 30" bench $30
(Measure the front door width because I'll be asking!)
FINISH COLOR STAIN, PAINT AND MORE CLICK HERE
FINISH COLOR STAIN, PAINT AND MORE CLICK HERE
FINISH COLOR STAIN, PAINT AND MORE CLICK HERE
BENCH OPTIONS -
Wider bench top -
Our standard width is 14.5" unless noted otherwise.
You can add up to 7" of width increments from 14.5" to 21.5" -
if your bench is,
4ft Length - $30
5ft -8ft L - $55
9ft -10ft L- $75
11ft -12ftL - $95
You don't have to go all 7", just do what you need.
End Caps (Bread Boards) - Adding end caps (pair) to the bench is $20. End caps are the boards that cap the ends and run a different direction.
(Note - as normal wood movement happens, the end caps can stick out little from the main bench section). Optional DIY
3" Thick framed bench top -
Regular bench tops are approx 1-1/2" thick, and we can frame them for a 3" thick look.
We started doing this top when folks wanted the railcar / boxcar thick look without the high price cost of that wood type.
4ft-6ft bench length $30
7ft-8ft L - $40
9ft-10ft L- $50
11ft-12ft L - $60
Add a back to any bench -
When a back is added to a bench, the seat width will also increase (14.5" to 18"W on farm style benches and 16.5" on picnic table style benches).
We add 2 back boards (5.5" wide) to the bench back.
Bench seat height is 18" and the back height we add is 21" for a overall height of 39" (this can be adjusted if needed).
if bench length is,
2ft length - $60
3ft - 4ft length - $70
5ft - 6ft length - $90
7ft - 8ft length - $120
9ft - 10ft length - $140
11ft - 12ft length - $160
FINISH COLOR STAIN, PAINT AND MORE CLICK HERE
Physically distress your bench top -
We can beat up your bench with various tools to give it a rough and we sand it smooth look.
Bench top only
4-7ft L add $25
8-10ft L add $35
11-12ft L add $45
Entire bench, add $20 to prior numbers.
Add the metal bar All Thread/Threaded rod between table legs - see above table option section for pricing
Bar and Pub height on handcrafted Tables and Benches (excludes turned leg pieces) -
Bar height 36" tall - table is additional $30 and 24" bench $20
Pub height 42" tall - table is additional $40 and 30" bench $30
(Measure the front door width because I'll be asking!)
FINISH COLOR STAIN, PAINT AND MORE CLICK HERE
FINISH COLOR STAIN, PAINT AND MORE CLICK HERE
Remember we custom build so things like leg positioning can be changed. Also many things can be adjusted since everything is built from scratch!
We do chairs, barstools and more! What is your finish color (Click here for options).
Please call for text for any questions 918-344-6929.
Farmhouse Farm Table & Bench. Custom furniture build in Oklahoma and surrounding areas
Slide-in table extensions
Slide-in, Table end extensions
Slide-in, Table end extensions
Slide-in, Table end extensions
Slide-in, Table end extensions
Slide-in, Table end extensions
Slide-in, Table end extensions
Ash wood type top
Slide-in, Table end extensions
Ash wood type top
